Skip to Store Area:

Arborlab

Promo

Terms & Conditions

Terms & Conditions

Lifetime Manufacturers Warranty, but not on misuse.
 
Broken blades and poles are normally caused through misuse, as ensure that the correct pressure is used on Poles and blades.  Only light pressure should be applied to the pull stroke not the push.  Any concerns please contact Arborlab Tree Care on 1300 368 170 or silkysaws@hotmail.com
 
UM;Kogyo, a company that has specialized in the manufacture of saws since 1919, makes SILKY Saws in Japan.  Unique technology and design has resulted in an extensive range of saws with superb cutting ability.  Silky Saws cut as you pull the blade towards you.  They DO NOT cut on the forward or push stroke!  Cutting on the pull stroke requires less energy and gives more control over the action of the saw. 
 
Pull Saw Technique:
Always hold the branch securely. 
Start cutting by lightly dragging the blade across the b ranch towards you.
Slide the blade forward.  No cutting takes place on the forward stroke.
Repeat until the branch is cut.
Medium pressure on the pull stroke and simply slide the blade forward.  Let the teeth of the saw do the work!
 
PRECAUTIONS
DO NOT PUSH FORWARD HARD-DO NOT PRESS DOWN HARD
Remember Correct Pruning Technique's are Important.
With larger branches always undercut first.  If the saw blade ever becomes caught in a  branch squeeze, always take the weight off the blade to free the saw.
Never wrench the handle fro side to side.

CARING FOR YOUR SAW
SILKY Saws cut exceedingly fast and efficiently.  To keep them this way we recommend that you wash your blades in warm soapy water to remove resin deposits.  A build up of resin will make it harder and slower to cut and if additional force is applied during  cutting, bending or breakage may result.   We also recommend spraying the blades with a lanolin based lubricant, for longer protection.
A clean blade gives optimal cutting performance. 
To get the best from your saw, use the teeth, not your strength.  LET THE SAW DO THE WORK!