The tips of the teeth have been hardened to give an extremely long life to the sharpness of the saw. The blades are hollow-ground to reduce friction and increase ease of cutting action and speed. The handle is made from Silky's special GOM material, giving superior grip and a reduction in vibrations. The teeth are non-set and have a Mirai-Me design which creates a very smooth surface once the timber is cut. The blades are made from a special material which is a high carbon steel and have been given a special coating in order to reduce rust and protect the blade.
The Zubat is a PULL saw. All cutting occurs on the pull stroke. Use a minimal amount of pressure as you pull the blade toward yourself and then glide the saw forward. On the forward stroke the teeth will clear of timber or material and then on the pull stroke the saw will do the cutting again.
All parts of the saws are available and replaceable. All Zubats come with a scabbard that has a belt attachment and attachment loops for leg straps. Leg straps are available separately in the parts section (Code 506-04-14)
For further information or technical questions call 07 3823 1599
SKU 270-24 Zubat Large Tooth Handsaw 240mm, 271-24 Blade
Blade length:-240mm or 9.5inches
Teeth per 30mm/in:-7.5/6.4
Weight:-445g
SKU 270-27 Zubat Large Tooth Handsaw 270mm, 271-27 Blade
Blade length:-270mm or 10.6inches
Teeth per 30mm/in:-7.5/6.4
Weight:-450g
SKU 270-30 Zubat Large Tooth Handsaw 300mm, 271-30 Blade
Blade length:-300mm or 11.8 inches
Teeth per30mm/in:-7.5/6.4
Weight:-490g
SKU 270-33 Zubat Large Tooth Handsaw 330mm, 271-33 BladeBlade length:-330mm or 13 inches
Teeth per30mm/in:-7.5/6.4
Weight:-495g
SKU 270-39 Zubat Large Tooth Handsaw 390mm, 271-39 BladeBlade length:-390mm or 15.4 inches
Teeth per 30mm/in:-7.5/6.4
Weight:-610g
SKU 278-33 Zubat Fine Tooth Handsaw 330mm, 279-33 Blade
Blade length:-330mm or 13 inches
Teeth per 30mm/in:-10/8.5
Weight:-500g
Silky Zubat Review by Matt O'Neil-TLC Tree Care
The new Silky Zubat with the larger tooth profile offers faster and more aggressive cutting performance in comparison to the previous model. The advantages of this cutting performance:
Fast cutting allows for easy top/back cutting or step cutting of horizontal branches 6"+.
Fast and accurate 'scarf' cutting for control of vertical and horizontal branches.
Use of efficient cutting device where establishment of 2 points of attachment isn't possible (extreme limb walk) where chainsaw use isn't appropriate (re safety standards).
| Allow Gift Message | No |